Renault Forums :: Independent Renault forum - View Single Post - Megane On Board Computer Not Working

View Single Post
post #5 of (permalink) Old 19th October 2005 Thread Starter
Junior Member
Join Date: Sep 2005
Posts: 16
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 0
Thanked 0 Times in 0 Posts
the problem was the soldered conection on the wiper arm, I took the wiper arm off resoldered the joint and it works perfectly now.To get to the trip computer conections take the top and bottom covers off from around the stearing column you can get to the screws by moving the stearing wheel, remove the radio remote control this is just 1 screw under a flip back cover,slide the coil off from around the ignition switch and unscrew the 2 screws that hold the wper arm assembly then mauvre the wiper assembly out of its position and pull the connector off the unit,its should be free to resolder the connections. hope this is helpful.

Last edited by suddone; 19th October 2005 at 10:25 PM.
suddone is offline  
For the best viewing experience please update your browser to Google Chrome