Join Date: May 2012
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 110 Times in 109 Posts
Re: Driveshaft noise after front spring change
There are two types of driveshaft...one with the pin as you have mentioned and if you didn't have to take the pin out in the first place then there isn't one....the other is a sprung loaded type...ie when pushed into the engine side it locates and locks in....one way to check this is to have the driveshaft in the engine side and not on the hub and pull gently....if the drive stays where it is its locked in...if it comes out with ease then push back in as far as it will go and test again.
Currently in whizzy41's garage:
Renault Megane 1.6e sport coupe 1998