Renault Forums :: Independent Renault forum - View Single Post - Renault Clio 2 - Electronics - Immobiliser problem.

View Single Post
post #27 of (permalink) Old 18th November 2013
Diamond member
JasSingh93's Avatar
Join Date: Nov 2013
Posts: 100
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 64
Thanked 4 Times in 4 Posts
Re: Renault Clio 2 - Electronics - Immobiliser problem.

I'm not sure if this'll help but I will try to explain this the best I can.

I had the same problem, I tried absolutely everything but the immobiliser often stopped the engine from firing.

Eventually I decided to look at the key circuit board under a powerful magnifying glass and a thin screwdriver. It turns out, one of the legs of one of the IC chips was moving very slightly. I figured this must've been the reason for the immobiliser not reading the key.

It is really difficult to see but if you look at all the connectors coming from the IC chips, you should be able to find a loose/moving joint.

I went over this joint with a fine soldering iron, also going over the other joints just to be sure, and re-assembled the key.

No problems at all since then! And this was about a year ago, I drive the car often and it has never failed to start since. Must be a manufacturing fault from Renault, only it affects nearly every key of similar age!
Currently in JasSingh93's garage:
Clio GT MK3 2009 1.6 16v VVT
JasSingh93 is offline  
The Following User Says Thank You to JasSingh93 For This Useful Post:
tlracing (26th November 2013)
For the best viewing experience please update your browser to Google Chrome