Renault Forums :: Independent Renault forum - View Single Post - clio door mouldings

View Single Post
post #3 of (permalink) Old 12th January 2007
Diamond member
DEEJAY 225's Avatar
Join Date: Dec 2006
Posts: 104
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 0
Thanked 1 Time in 1 Post
on the quarter moulds, open the front door and place some tape on the edge of the paint work where the mould meets the door gap, place a flat bladed screw driver betwwen the tape and the mould and lift the moulding out over, and then pull the moulding towards the door and its off

the door mould remove the end badge,should say 1.2 or 16v ar renault sport,place a flat bladedscrew driver under the cap,not the moulding and lift gently or you will break it,then once its moved of the clips do the same to the top
once off push the full moulding back and place the screw driver under the back edge of the door and lift and it will slide off

job done
Currently in DEEJAY 225's garage:
2006 megane 225 CUP
DEEJAY 225 is offline  
For the best viewing experience please update your browser to Google Chrome