I don't know if this has been posted before. I just managed to access the resistor pack in 5 mins, maybe less. Haynes reckon the dash top fascia needs to be removed, massive job. I avoided this.
I simply removed the two digital dash surrounds, then to the right of the digital display is quite a large hole. I shone a torch in here and there in front of my eyes was the connector for the resistor pack. Reached my arm in, disconnected it, have noticed slight burning on connector, so need to replace this. The connector has quite long cables, so reaches outside the dash for repair.
Removed resistor pack with torx screwdriver, appears to be OK, put all back together and is working now. But will need new loom section.
EDIT: See post 17 on for pics.
I simply removed the two digital dash surrounds, then to the right of the digital display is quite a large hole. I shone a torch in here and there in front of my eyes was the connector for the resistor pack. Reached my arm in, disconnected it, have noticed slight burning on connector, so need to replace this. The connector has quite long cables, so reaches outside the dash for repair.
Removed resistor pack with torx screwdriver, appears to be OK, put all back together and is working now. But will need new loom section.
EDIT: See post 17 on for pics.