Hello Fellow Renault lovers.
I hope some one can assist me with a couple of issues i have with my new secondhand Renualt, which is driving me Crazy.
took the vehicle to Renualt and they gave me the following feedback after the vehicle started giving me problems.
P2502 - CHANGING SYSTEM VOLTAGE
P0325 - KNOCK SENSOR 1 CIRCUIT (BANK 1
UPSTREAM 02 SENSOR CIRCUIT
P0340 CAMSHAFT POSITION SENSOR "A" C
the issue with the car is as follows, when the vehicle is cold, it runs perfect, with the exeption of a wizzzzzz sound coming from the engine (and the car does not have a
)- i think this might be the dephaser pulley, but the car has power at this stage, until the heat reaches the normal running temp. then the issues start, the vehicle will just suddenly loose almost all power, if you push the clutch in and press down on the accelerator the car will rev. but if you drop the clutch again no power.
i have replaced the camshaft sensor myself- actualy very easy todo.
also replaced the
pack and plugs with brand new ones.
tested it last night again after the sensor was replaced, and the car does the same as mentioned above.
could it be that the upstream sensor that gives the issue ?? when the car reach a certain heat it malfuntion ??
i would be so thankful if any one can assist, as this is driving me crazy