Good Evening One and All
Looking for expect help on a random problem i have.
I recently have intermittent stalling problems which i solved with a new MAP sensor.
since having this done, all was well no problems or codes coming up. I took the car for trip to bristol, (130mile trip on motor way) had no problems at all.
A few days after this i went on a small trip 15miles and when i was on the motorway the car stalled on me doing around 75Mph. which was a very scary experience. the car started back up straight away, but would continue to stall at random times when i had been doing any speed higher than 60+ish Mph.
Although since this has started happening i am able to drive the car on main roads and as long as i am doing under 60, i have no problems.
This is what happens when it stalled the first time, the orange coil light along with the engine stop light came on flashing and the rev meter dropped to zero, and bouncing back to to around 2000 and back down before dying. i have no power at this point.
The engine management light came on and these are the fault codes that i read at the time.
P2413, P0670, P106B, P1026, P100F, P1078, P1009, and P1014.
these faults came back a couple of times after cleaning them, but after doing this a couple of times a few of the faults went and the engine management light didnt come on at stall.
these were the remaining codes;
P106B, P1026, P100F, P1078, and P1009(but this didnt always show up either)
Please would someone be able to advise what any of these faults could mean, as i cant seem to find any type of information about each one, other than the glow plug relay modulus.
Thank you very much
Kind Regards
Dave
Looking for expect help on a random problem i have.
I recently have intermittent stalling problems which i solved with a new MAP sensor.
since having this done, all was well no problems or codes coming up. I took the car for trip to bristol, (130mile trip on motor way) had no problems at all.
A few days after this i went on a small trip 15miles and when i was on the motorway the car stalled on me doing around 75Mph. which was a very scary experience. the car started back up straight away, but would continue to stall at random times when i had been doing any speed higher than 60+ish Mph.
Although since this has started happening i am able to drive the car on main roads and as long as i am doing under 60, i have no problems.
This is what happens when it stalled the first time, the orange coil light along with the engine stop light came on flashing and the rev meter dropped to zero, and bouncing back to to around 2000 and back down before dying. i have no power at this point.
The engine management light came on and these are the fault codes that i read at the time.
P2413, P0670, P106B, P1026, P100F, P1078, P1009, and P1014.
these faults came back a couple of times after cleaning them, but after doing this a couple of times a few of the faults went and the engine management light didnt come on at stall.
these were the remaining codes;
P106B, P1026, P100F, P1078, and P1009(but this didnt always show up either)
Please would someone be able to advise what any of these faults could mean, as i cant seem to find any type of information about each one, other than the glow plug relay modulus.
Thank you very much
Kind Regards
Dave