Join Date: Oct 2006
Nominated 1 Time in 1 Post
TOTW/F/M Award(s): 11
Thanked 205 Times in 161 Posts
There are 2 small strips of metal within the seat belt holder that make/break contact. When the seat belt isn't plugged in the two bits of metal touch each other making the circuit which triggers the beep. When the belt is plugged in it pushes these two bits aprt, breaking the circuit & silencing the alarm. The warning light will still work because that is controlled separately.
You will probably find that these bits of metal are either worn or broken.
Its a fairly easy job to open the seat belt holder, all you need is a small torx driver. Once the holder has been opened you should be able to see the metal strips - it may just be a case of gently bending them back with a pair of needle nose pliers so that they touch again. If they are broken or have lost their "springiness" ( made up word) you probably need to have a new seat belt holder.
Hi would this be true of my 2002 espace i have i light but no buzzer????/
I have heard of others deliberately bending this strip apart because the beeper was so annoying.
This is certainly true of the Megane seat belt holders so pretty sure it will be the same on the Laguna!
Hi is this true of my 2002 espace i have i light but no buzzer cheers?????
Currently in Donald's garage:
2005 Mercedes Benz C200 Classic SE Kompresser & 1998 Fiat Cinquecento Fire Sporting,some may say i could do far better?,i say i could do far worse.