Join Date: Aug 2005
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
CAREFULLY remove the mirror. If you look closely behind the lower edge of the mirror you should see a spring type retaining wire. slide it to one side and the mirror should come free.
The sensor is then held in by a screw.
If you join the new to the old wires DO NOT USE HEAT. Just wind them closely together and cover with insulation tape.
During reassembly - make sure mirror retaining spring is in place at rear of mirror and gently push on the housing.
Currently in Mickdoc's garage:
2006 Renault Scenic 1.5dCi privilege