Renault Forums :: Independent Renault forum - View Single Post - Renault Laguna 2 - Dismantling Door Mirror To Access Temperature Sensor

View Single Post
post #10 of (permalink) Old 3rd March 2007
Diamond member
Mickdoc's Avatar
Join Date: Aug 2005
Posts: 209
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 0
Thanked 0 Times in 0 Posts
Adjust the mirror so you can see as much as possible of where it is attached to the centre mount. Push the top in. You should be able to see 2 ends of the retaining wire / \ at the lower end of the centre mount. With a piece of wire or something similar try to move/free one of the ends - this then slackens the retaining spring from the centre mount.
Renault then utilise a tool shaped like a 'tyre lever' which goes between the mirror and the mirror cover which, with gentle pressure levers off the mirror. This is done from the top edge.
I shaped a thin piece of wood for this purpose ~-
I was quite nervous as I had the expensive metallised Initiale mirrors - they of course remain attached to the heater wires so did not fall on the floor.
Refitting is much more straightrforward.
Currently in Mickdoc's garage:
2006 Renault Scenic 1.5dCi privilege
Mickdoc is offline  
For the best viewing experience please update your browser to Google Chrome