Join Date: Nov 2005
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 1 Time in 1 Post
Thats odd mines on the drivers side mirror
Adjust the mirror so you can see as much as possible of where it is attached to the centre mount. Push the top in. You should be able to see 2 ends of the retaining wire / \ at the lower end of the centre mount. With a piece of wire or something similar try to move/free one of the ends - this then slackens the retaining spring from the centre mount.
Renault then utilise a tool shaped like a 'tyre lever' which goes between the mirror and the mirror cover which, with gentle pressure levers off the mirror. This is done from the top edge.
I shaped a thin piece of wood for this purpose ~-¬
I was quite nervous as I had the expensive metallised Initiale mirrors - they of course remain attached to the heater wires so did not fall on the floor.
Refitting is much more straightrforward.
excellent post the mods should move it to the how to section
ONCE A BLUE ALWAYS A Blue.
A FRIEND IN NEED~~~IS A PEST.GET RID OF HIM
Currently in 5th wheel's garage:
56 focus c.max 1.6 zetec / 07 6x2 440A M.A.N