Join Date: Jun 2009
Nominated 3 Times in 11 Posts
TOTW/F/M Award(s): 4
Thanked 514 Times in 490 Posts
im not sure...
i got a 97 ph1 bumper, its got no free space above the fog light, theres the reinforcing metal panel there on the bumper itself.
the ph2 should be pretty much the same.
if your ok with drilling through the metal then you will find there is the crushable plastic matrix behind that then the front mid cross member which is on the end of the chassis wing.
the plastic matrix can be adjusted without any issues, to allow the cables past them. just the drilling through the bumper palstic and metal support is the issue.
on the back there is no problem as you will be below the reinforcing metal and you can route the cables through the rear air vents on either side of the back of the car.
Currently in mord's garage:
The CreditCard Holes sooo DEEEEP NASA have put up warning signs about a black hole on the Driveway: update, the driveway and home have fallen in...