Join Date: Jan 2014
Nominated 14 Times in 13 Posts
TOTW/F/M Award(s): 3
Thanked 1,614 Times in 1,398 Posts
Re: Anyone done this
My Fiat had a locating pin built into the hub but it was still tricky getting the holes lined up, especially on the front when the hubs would rotate. I found the best way was to sit on the floor with my feet under the car and support the weight of the wheel between my knees whilst locating the bolts into place.
My stilo and panda's did as well..on the stilo I had to remove the locating pins though when I fitted 17" after market alloy wheels ..and on the panda's when I fitted 15" aftermarket alloys..
and thats when the problems start..
Currently in Phil48's garage:
There is nothing in my garage now..