Join Date: Jul 2005
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 0
Thanked 48 Times in 39 Posts
Agree - modern engine bays are so crowded these days a simple job like replacing the bulbs is a nightmare.
I would like to be able to design car so that the headlight/light covers could be unclipped from the outside and you could replace the bulbs from the front, then simply replacing the cover again. This would involve redesigning the bulb fittings as well to either a screw in or bayonet type fitting. Alternatively I would use clusters of leds for the headlights - leds last a lot lot longer than filament or even xenon bulbs and draw less current so would hopefully never need replacing.
Currently in SportTourer's garage:
2010 Laguna III SportTourer Initiale Tom Tom.