Still a Petrolhead but also like diesel
Join Date: Apr 2006
Nominated 0 Times in 2 Posts
TOTW/F/M Award(s): 2
Thanked 17 Times in 17 Posts
Excellent post Canonman.
Another tip for "P" door seals (e.g. Clio2) is to use some draught excluder the foam stuff that comes on a roll about 5mm thick (white foam rather than the grey sponge type) and using electricians wire snake/fish tape/ access rods etc carefully pull the foam through the "P" in the door seal (you might need to remove the seal and straighten it out to do this, oh and if self adhesive DONT remove the backing tape.)
This makes the "P" a bit thicker when the door shuts and stops draughts, wind noise and water penetration from the seal.
Hope it helps
Why is it the older I get .... the better I think I was ?
Currently in Truckbusuk's garage:
Clio2 1.4RT Phase1(VF1BB0S) + Volvo XC90 SE Lux D5 Geartronic