Join Date: Apr 2007
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
Tested the front wheel sensors - both ok.
(you can pull the connector apart at the back of the wheel arch and test it with a ohms meter. mine varied between 0.9 to 3k when spinging the wheel)
also replaced a section of brake pipe to the rear left.
during bleeding up the brake resoviour seemed very very low
once all finished and fully re-bled the abs light went off (as it should) after about 50 metres.
so, check your brake fluid levels and the level sensors
it may not be just the wheel sensors.
Currently in tinpot's garage:
98 megane 1.4e