Independent Renault Forums banner

Renault Megane - Electronics - Car stereo error code

37K views 17 replies 11 participants last post by  Dancingdad 
#1 ·
Hi .. I am a newbie to site , and what a great site , very useful .
However ... I tried a search for my problem but unable to find an answer ..

I have a Renault Megane that I have just purchased a CD player for, I have the code for it also the registration number of the Renault Clio it was originally in.

After trying to enter the pin , which I mistakenly entered incorrectly a few times , it now comes up with ERROR .

Can anyone advise what I can do to reset this and enter the correct code ? (I did read somewhere about putting the stereo in the freezer overnight ?)

regards

Chris
 
#2 ·
Hi Chris.
No need to freeze it....just leave it powered up for a few minutes,after a delay you will see code 0000
the more times you enter a wrong code the longer you have to wait i.e.
1min 2 mins 4 mins 8mins 16mins (it keeps doubling)

:eek: Hope that helps m8.
 
#7 ·
Hi gavwil

Leave the radio with power on and error displayed..after a while the display will change to code..then enter the code in this method :-

Code Entry as Follows:
Switch Radio On - Display Shows
" CODE "
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard
And the Radio will then Turn On


Hope this helps


:) :)
 
#12 ·
hi there, i m new on this site and i really need a big help.

I have a Renault Megane 19dci it came with the stereo, as i brought it second hand i dont know the code of the stereo.:confused:

After trying to enter the pin , which I mistakenly entered incorrectly a few times , it now comes up with ERROR .:mad:

Can anyone advise what I can do to reset this and enter the correct code ?

regards

melvin
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top