Amp power cable through bulkhead in 02 Clio - Page 2 - Renault Forums :: Independent Renault forum

Electronics In Car Entertainment (ICE), Sat-Nav, lighting, wiring etc.

LinkBack Thread Tools Display Modes
post #6 of 6 (permalink) Old 10th April 2009
Junior Member
Join Date: Apr 2009
Posts: 1
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 0
Thanked 1 Time in 1 Post
where to put the live wire for the amp mk2 clio

what you need is a 10mm spanner (easyer with a rachet spanner) and theres a huge black metal sheet and the back of the engine 1st remove the coolant tank 2 bolts and slide it upwards then the push the top hook part of the power steering tank and slide the tank upwards now these are out of the way start undoing all the other bolts on the black sheet (all 10mm) then once theyre all out the black sheet should come away. youll then see the heater motor & fan etc . there are two 10mm bolts on this and one torques bolt (not sure what size but the tool kit in the car should have it its the large one. undo this and the heater is off. right this part is hard to explain (ill try my best) theres a black plastic rim around the top just above the metal body work and it looks attatched to the blower pipe goin down into the car but its not. just past the black rim going down the pipe theres a slight seal but push a screw drive through it wiggle it side to side and thread the wire through next to the screw driver keep pushing the wire through. go into the passengers foot well and look up and have a feel about youll find the screw drive and wire pull the wire through as far as you need and remove the screw driver and then run the wire up towards the battery obviously behind where the metal plate goes towards the screen wash tank and theres the plastic cover for the wiper s and theres a plastic clip thing where you push it down in the middle and it comes off lift the cover up and run the wire through between the wiper cover and the rubber wire holder (no need to go through just go on top and then puch the clip back in making sure its all in place. then you can put the heater back just do it up tight it still seals even through theres a wire and then put the plate back and do all the bolts up tight and slide the coolant bottle back into place and bolt up and then slide the power steering bottle back into place and it should just clip in on its own when you slide it back in. and then your in.
Currently in klasher's garage:
mk2 clio
klasher is offline  
The Following User Says Thank You to klasher For This Useful Post:
xregcumbria (28th March 2016)
Sponsored Links

amp , bulkhead , cable , clio , power

Quick Reply

Register Now

In order to be able to post messages on the Renault Forums :: Independent Renault forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome