Join Date: Oct 2006
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 0
Thanked 28 Times in 27 Posts
Hi, and thanks for the replies. There are no fault codes stored in any of the controlers, cant access engine ecu which i suspect is beacause I can't switch the ignition on. The problem with the car is no ignition when the card is inserted, the reader seems to be working and accepting the code, both micro switches are ok too. Using a different scan tool under imobiliser i can see the steering lock flashing between active/inactive, I'm guessing it's not able to activate the lock. For some reason I can't get live data for imobiliser in clip. I can activate the ignition relay through uch functions so I'm assuming the uch and instruments are ok.
The steering lock flashing between active/inactive is normal.
How do you know the card code is accepted?
In CLIP status ET096 should indicate if the code was accepted by the lock.
Currently in Eeeps's garage:
2011 Clio III dCi 88 Dynamique and 2016 CitroŽn Grand C4 Picasso Exclusive+ EAT6 2.0 BlueHDi