Join Date: Aug 2010
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
Re: Renault Scenic 2 - Rear Brake Pad Replacement
Great post. I'm going to my discs and pads on my laguna II shortly. These have a bearing built into the disc hub. I have a caliper windback tool so I'll try and do as good a post as you have. This is what forums should be about.
BTW DemonXP is completely wrong about winding back the calipers. Later Renault REAR calipers must be wound back using the tool that you used. Fords also have a similar set up. It is imperative that you do this. Forcing it back will damage the caliper. Front calipers just push straight back. I bought a laser wind back too and it covers all of the modern and popular makes.
Is the laser tool the six sided cube that is turned using a 3/8 drive? If not can you give me the part number for the tool, thank you
Currently in Marinak's garage:
1996 Renault Grand Scenic II Dynamique 2.0 VVT 136 Auto Euro IV, 50,000 miles