Join Date: Jan 2007
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 1 Time in 1 Post
Anyone have an idea how hard it is to fit a new rear Gearbox mounting.
It looks like just two bolts but my Hatnes Manual says
"loosen (but do not remove) bolt A then unscrew and remove bolt B from the rear mounting link".
This is part of the full instructions for removing the gearbox but it doesn't go on to say that I can remove bolt A at any stage.
I'm asuming that undoing both bolts together might result in the gearbox dropping slightly and causing some damage.
If I use a jack to support the gearbox can I remove both bolts and replace the mounting?
Any advice would be most welcome.
Currently in skewett's garage:
RENAULT CLIO 1200CC