Greetings all hope your year has gone better than mine so far, some of you may have read the post i made to the back end of last year about an overheating problem with a 94 2.1 TD Espace well i can say it just got worse from there found the problem to be a cracked lining, luck would have it (so i though) that a friend of mine knew someone with a 2.1 TD espace who was breaking his car due to the fact it had burnt out some of the wiring harnes so i went along to have a look. The engine its self was cosmeticaly fine and after a lot of thought i decided the risk of taking the engine would be acceptable i fitted the engine to my espace to then find out why the wiring caught fire on the espace i took it from luckily i was under the bonnet of my car when the wiring went on mine and got the battery disconnected within seconds, it turned out the temp sensor for the heater pulg control unit was faulty and spent half a day repairing 3 wires after all this i finaly got the car to run on all cylinders with a great sigh of relief until i noticed there was no
pressure, i even checked the
pressure switch but upon looking inside the engine no
what so ever.
So i know some of you may think why go this far? why not tie it up in a field and run away from it?, what can i say i hate to be beat by an engine, since all this i have stripped and mostley rebuit the original engine and hope to have every thing completed with in the next week.
But i need a little help from someone with a 94 2.1TD Espace,
When taking the engine out i asked my brother who was helping me to mark the block and feed pipe to the
cooler/filter with touch up paint which i fond out when it was to late that he had marked with metal chalk.
If possible could someone just pop there bonnet and take a look at the top of the
cooler (located on the left hand inner wing just to the left of the
) there will be a arrow pointing to the centre of the cooler follow the pipe to the engine block and let me know if its attached to the top or bottom attachment
Thanks in advance for any help with this