Join Date: Jul 2005
Nominated 0 Times in 6 Posts
TOTW/F/M Award(s): 6
Thanked 63 Times in 22 Posts
Unplug the pipes and temp wiring on top of the filter housing.
Remove the filter housing from the vehicle by pulling the cannister upwards. (it slots into a metal bracket and can be tight. A spray of WD40 on the slots will help free it up) Remove the single Torx40 screw and lift the lid.
Remove the old element, tip any remaining fuel out of the cannister, and fit new element.. If you buy a renault filter you will get two new seals that must be fitted to the Lid and screw head.
Replace the lid and refit to the vehicle and reattach the pipes/connector..
There should be a black rubber fuel priming bulb attached to the OSF wing near the filter. squeeze this bulb to prime/fill the fuel filter cannister. The bulb will go a little hard when the system is refilled.
Start the vehicle and away ya go.
EX Renault Dealer Technician & MOT Tester, Not a Monkey!
For as long as but one hundred of us remain alive, we will never on any condition submit to the domination of the English.....It is not for glory, nor riches, nor honours that we fight, but for freedom alone, which no good man gives up except with his life. Arbroath 1320
Currently in WebCode's garage:
MK1 Facelift Megane Cabriolet Sport