Renault Forums :: Independent Renault forum - View Single Post - laguna 2 Abs fault

View Single Post
post #51 of (permalink) Old 17th September 2015 Thread Starter
Junior Member
Join Date: Jul 2015
Posts: 25
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 1
Thanked 3 Times in 2 Posts
Hi folks,

Fix one thing and another appears,
Removed the drivers side sensor and cleaned up the target ring and that fault code hasn't re-appeared.
Now though I'm getting three fault codes
Rear left sensor circuit, rear right sensor circuit
Front left sensor circuit.

I can clear them but run the car again for a bit and the same three codes re-appeared every time.

The weird thing is that the rear left sensor hasn't even been disconnected so why it's highlighting as a fault I have no idea.

I have had the connector off of the abs controller and all the connections appear fine.
Not sure if there's a common denominator to the 3 abs sensors because I doubt very much that all three are duff at the same time.??

The speedo is working and I have voltages at all abs connectors.
The only thing I noticed different about the voltages on the drivers side compared with the other three is that the sensor side of the connector (as appose to the 12v supply) gives a reading of -02.2 volts but the other 3 Give 0v Dc

I cannot do continuity tests as I don't know the pin indents on the abs pump connector.

Any ideas please?

Thanks folks
Currently in stuart1007's garage:
2002 LAGUNA 1.8 16V
stuart1007 is offline  
For the best viewing experience please update your browser to Google Chrome