Join Date: Apr 2006
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
I have fitted and removed the wifes many time.
The brackets with the wingnuts attach to the tailgate hinge fixing bolts. Open the tailgate and look at the roof, remove the plastic covers to acces the mounting, you should have some extra nuts to go on, but if not dont worry, just do one side at a time.
Once you have both brackets on, wind the spreader bar pads so they are pushed all the way into the lower bar in the grill, manoveur it into place(remembering the middle seatbelt cut out) and fit the bolts with wing nuts into the brackets but do not do up yet, now pull out the spreader bar pads and place onto the rear quarterlight panels, spin the lock rings to lock the bar so it is a snug fit and then tighten the wing nuts up all the way.
best of luck
mate do you think you could post a picture of the fitted dog guard Im dying on my butt here
Last edited by theboneman; 8th November 2007 at 04:57 PM.
Reason: inapropriate wording