Join Date: Sep 2005
Nominated 1 Time in 1 Post
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
Hi to change the rear pads is easy enough.
But you will need to wined back the caliper piston fully.this also resets the hand brake levers.
Dont forget to clean the area of the caliper where the pads sit ( lube with a smear of copper grease) Not to much as this will contaminate the pads.
when finished the pads just check the flexable brake hose for position (clearance from the road spring) .These have been knowen to rub on the spring and fail.
Currently in Michael-S's garage:
2004 dci 100 traffic 6 speed