Join Date: Dec 2007
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 4 Times in 4 Posts
Ok here goes with a few pics on how to get rid of that awful sloshing noise which seems to appear behind the glove box,
Firstly Open Your Bonnet And Undue Bleed Valve Shown Below Only Slightly And Leave Expansion Tank Cap On Then Start Your Engine.
Then Use Idle Cable Shown In Picture Below And Pull Cable Up Only Slightly Until Coolant Starts To Flow Constantly NOT Splutter As That Means There Is Still Air In Coolant Once It Runs Clear Tighten Bleed Screw Up And Your Done, Top Up Coolant If Necessary.
Hope This Helps Any More Advice Wanted Contact Me Through Forum Thanks
Currently in swfcowl5's garage:
Renault Megane 1998 RT 1.4i And A Renault Scenic 1.6 1998
Last edited by ottoman; 15th December 2007 at 08:27 PM.