Wow, are both inner races touching each other, no gap to talk about,,,
no gap that i could see
Did you not have to force the bearing inner race back in... or as looking at your video slight pressure?
no real pressure, it seemed to pop in.
Will the other side of your bearing pop out as easy?
i havent checked, i hope not. that was my worry. maybe it was the outside that came off the first time.
Or is it coming apart easy, because you have had the drum off a few times.
i put the drum on the first time after having the bearing fitted, then the inner part got stuck. which was annoying.
This Bearing did come as a one piece unit? Was there a clip, between the two inner races, to hold the inner races together?
i cant see a clip between them. it only came with a C clip. it is one unit, pre-built.
thanks for the 175nm, i didnt know that. i think my torque wrench goes that high.
i removed the brakes, cleaned the back plate as much as possible. took off the lip from inside the drum. bought some anti seize grease. i hope to refit the brakes with the grease. then slacken off the brake cable.