Join Date: Dec 2007
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
There should be three bundles of cable in three connector blocks. There are two on the lower half of the back and one on the upper half. The upper one should have a solid black cable going into it (not the thick black cable on it's own - that's the aerial). That's the block that you should remove and reinsert.
There is a clip on one side which makes it a little awkward but if you squeeze it from the sides and wiggle it, it will come out. You should see the clock/temp go out. When you put it back in it will come back on along with the CODE prompt.
I sent you a PM - not sure if you got notified. I'm out of the office now. I hope this has helped.
Currently in peterandmhairi's garage:
Megane CC 1.9DCi