Join Date: Jun 2009
Nominated 3 Times in 11 Posts
TOTW/F/M Award(s): 4
Thanked 514 Times in 490 Posts
Re: Laguna 2 front bumper removal
n/s abs module doubles as speedo sensor, there is 1 end cable, and it goes direct to the abs loom on the inner wing. o/s abs sensor goes to o/s inner wing onto an extended (trans engine bay extension) that goes across to near the n/s connector.
you wont get a reading from a clip for speed if the cars stationary. must be plugged in and driving to get a reading.(need an assistant to play with computer while your driving down the road)
you CAN! do a (static) relluctor ring reset reading with the clip with each wheel off the ground.(instructions are in the clip on that section as you test it.) this is as good as a drive down the road but takes a bit longer as your working your way round the car, jacking up each wheel and doing a 360' rotation of each wheel. reluctor ring should be about 43 tooth ??? (just depends on model of car)
access to the ABS unit is via the front of the wheel arch, removal of the inner splash guard and front bumper quarter splash guard. once the covers are off you will have clear access to the module. it will be coated in mud etc. use lots of wd40 to loosen up the connector.
fault is more likely the N/S sensor cable connection on the inner wheel arch or the sensor has failed, do you have ABS error as well as failed speedo dial ?
Spare parts available for 2001 Scenic 1.9Dci, 97 Lag1, 02 Lag2.
everythings gotta go....
Currently in mord's garage:
The CreditCard Holes sooo DEEEEP NASA have put up warning signs about a black hole on the Driveway: update, the driveway and home have fallen in...