Renault Forums :: Independent Renault forum - View Single Post - Tyre pressure sensor pickup wiring loom

View Single Post
post #7 of (permalink) Old 31st January 2008
Diamond member
Gogslad's Avatar
Join Date: Sep 2005
Posts: 528
Nominated 0 Times in 1 Post
Nominated TOTW/F/M Award(s): 2
Thanks: 3
Thanked 25 Times in 22 Posts
Look behind the n/s/r wheel and you will see a black plastic cover with a 10mm nut in the middle of it, the connector for the tpms loom is in here, very bad for corrosion inside the wiring, also very thin core wires so not very durable, bit daft running them along the floor outside really, not that dear to buy the loom, about 30 quid off hand, easy to change, if the valves were coded and working ok before then they should work after it's replaced as the valve codes are memorised in the uch for summer/winter tyres.

just to clarify, its behind the wheel but at the front of the arch, if you see what i mean.
Currently in Gogslad's garage:
Koleos, RR1 Fireblade, RRW Fireblade, CZ 125.

Last edited by Gogslad; 31st January 2008 at 06:55 PM.
Gogslad is offline  
For the best viewing experience please update your browser to Google Chrome