Renault Forums :: Independent Renault forum - View Single Post - Brake hose not sealing to caliper - Clio MK2 Rear Disc

View Single Post
post #8 of (permalink) Old 3rd June 2016
Platinum member
Technical Supremo
TTT's Avatar
Join Date: Jun 2008
Posts: 1,946
Nominated 3 Times in 7 Posts
Nominated TOTW/F/M Award(s): 4
Thanks: 197
Thanked 397 Times in 346 Posts
Re: Brake hose not sealing to caliper - Clio MK2 Rear Disc

Originally Posted by lancs dave View Post
...If you can get hold of a new pipe nut, you could try winding it in to the hole a few times in the hope it remakes the original thread.
It might allow you to get your nut back in straight....
That was going to be my next suggestion....

If you get a new union and put a half depth hacksaw cut up the length of the threads you have a tap that will cut / clean the threads in the caliper


Please take the time to enter your vehicle details in the "What's current in your garage?" box.

To do this:
Hover over the "TOOLS" tab at the top of the page
> then in the dropdown click on "User Dashboard"
> click on "Edit Your Details" at the top Left hand side.
> scroll down to the "What's current in your garage?" box and enter your vehicle details.
> Once the details are entered scroll down to the bottom of the page and click "Save Changes"

> Done.
Currently in TTT's garage:
2001 Renault Laguna II 1.9dCi Dynamique Sport Tourer
TTT is offline  
For the best viewing experience please update your browser to Google Chrome