Honorary Yorkshireman just in Derbyshire
Join Date: Dec 2008
Nominated 19 Times in 15 Posts
TOTW/F/M Award(s): 5
Thanked 1,697 Times in 1,300 Posts
Re: Fitting megane front wing
Thanks Nottnoc I need to change a wishbone and the undertray has to come off (and stay off) anyway. Apparently the wishbones shouldn't be torqued unless the weight of the car is on them so I'm thinking I could jack the wishbone up until the car is just off the axle stand and tighten them that way?
OK 4 Diddy Torx on inner wings, 2 each side, 3 x 6mm Undertray, 5 Plaggy along bonnet edge. Unclip at wing joints.
Re Wishbone, done two, A) Didn't Torque (kin tight) B) Did it in the air. C) No problems. Ignorance Bliss.
You are only young once, but you can be immature forever
Give a n00b the answer he will be learn for a day; show him the search button, he will learn for life.
Currently in Nottnoc's garage:
2008 Scenic Mk2 Dynamique 1.6 K4M 782. 1998 BMW K1100LTSE, 1994 MotoGuzzi Caifornia 3 LAPD, 1972 Norton Commando, 2010 Trafic SL29 M9R782 115, Lots of tools, Camping Gear & Booze