i have been asked to fit new pads on a senic i think it's an 51 plate petrol my question is do i need any special tools as i remember on a vectra i had on an 04 plate the piston had to be wound back in not just pushed ..
well done the both sets of pads today and the back wasn't as bad as i thought put a g clamp on the piston and wound it in no trouble ..thanks for all your help guys ..
i have been asked to fit new pads on a senic i think it's an 51 plate petrol my question is do i need any special tools as i remember on a vectra i had on an 04 plate the piston had to be wound back in not just pushed ..
hope this might help when changing pads on my scenic 07 the fronth and rear pistons required spical tool to wind in the pistons the hand brake depending if thire is motors attached to the rear calabers i belive you just reverse the wires and the piston retracts then just re connect i think you may need the ignition on best of luck pat p
I need to replace the pads on my 2010 Grand Scenic JZ 1.9 dci with electronic handbrake.
When i look at online shops, the brake system is sometime mentioned e.g.
for TRW it says for Lucas. For Brembo often Bosch written.
Is there a difference in the calipers or can I fit any pads ?
any help appreciated
/ Tim
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Independent Renault Forums
1.5M posts
207.7K members
Since 2005
RenaultForums.co.uk is the best place to discuss the French automaker’s cars including the Megane, Clio, Modus, Captur and more. Join now!