Independent Renault Forums banner

Laguna mk 2 abs fault help

2K views 5 replies 3 participants last post by  johnboyw 
#1 ·
Hi people i have the abs light and serve light on constant i have checked for wheel bearing play and i have cleaned the backs of the hubs on the back and front and still the lights on
i have had it plugged in and it says the front and something vss can anyone shed any light on this as im out of options the sensors look ok but i have no way of checking them

any help would be greatly appreciated
regards and thanks gareth:(
 
#3 ·
hi there thanks i have just took the hubs off again and discovered that the ring that holds the abs sensor on to the back of the bearing is slightly rotten so i think the abs sensor has moved away from the bearing hence abs fault so im going to buy the new clips but i have just found out that the clip only comes with the bearing so i have to buy bearings now i might aswell just change the wheel bearings while its off i will let you know how it goes but thanks for your advice really appreciated

thanks matey:crazy:
 
#5 ·
hi there johnboyw yes matey im going to do this myself i have took the hubs off and have discovered the abs holing rings behind the bearings have rotted slightly. i think the abs sensor has moved slightly away from the bearing so im having to put 2 wheel bearings in as the rings cant be bought seperately they come with the wheel bearings so im told
regards gareth
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top