Join Date: Dec 2005
Nominated 2 Times in 20 Posts
TOTW/F/M Award(s): 18
Thanked 1,103 Times in 942 Posts
Re: clio disc and brakes
The manufacturers name should be stamped into the caliper,possibly Lucas,Bosch,Bendix or ATE.
Measuring the size of discs with them still on the car can be awkward,but really your motor factor should be able to match the size to the closest one to the measurements you've given them.
If your still struggling,the only sure way you'll end up with the right parts is to remove the disc and pads from one side of the car and take them with you to the factors,these provide a pattern and you can match them up 100%.If you need to use the car to get to the factors you can remove one pad,draw round it on a piece of paper,then refit the pad and use the template on the paper to match the pad,you should be able to match the disc size to the type of pad needed.
As far as the disc retaining screws,Renault generally use a T30 Torx headed screw.
I'd rather push my Alfa than drive a BMW....
Currently in Lagdti's garage:
2004 Saab 9-5 HOT Aero and a 2001 Audi A3 1.8 Turbo