Join Date: Jan 2006
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 1
Thanked 28 Times in 27 Posts
Ok part 2
First of all on the drivers side remove the screw securing the switch/ corner trim panel. Pull this downwards to disconect two plastic lugs (go carfull as they are easily broken)
Disconect any wiring.
Now remove the instument panel suround. (from memory two at top and two underneath)
Now the instument panel can be unscrewed. Carefully remove any wiring and disconect the speedo cable.
Now the instrument panel can be removed, but it must be stored in an upright position. If is tilted for more than ten mins it will become U/S
The small back lights can now be removed from behind using a pair of long nosed pliers. (twist gently anti clockwise) The bulb and bulb holder come as a combined unit.
When replacing the bulbs make sure that you use the same wattage as the ones that you removed. I think they are colour coded to help but just double check.
Now all can be reassembled.
Hope this helps. Regards Oily.
I am not an alcoholic. Alcoholics go to meetings:D "
Currently in Oilyrag's garage:
59 Vauxhall Zaffira 1.6 Life & 1957 Austin A35