Renault Forums :: Independent Renault forum - View Single Post - Fan switch plug

Thread: Fan switch plug
View Single Post
post #5 of (permalink) Old 29th July 2008 Thread Starter
Junior Member
Join Date: Dec 2007
Posts: 26
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by lagdti View Post
If the metal connection in the plug is corroded or damaged,then it will just over heat more and cause more damage.The resistance in the connection is what causes it heat up and melt the surrounding plastic,so it needs to be thoroughly cleaned up in the very least.

Depending on the type of connection used to may be able to seperate the damaged wire from the plug and replace the connection with a spade connector.This can work effectively if you can find the right sized spade connector and you make sure that it can't touch any of the wires next to it.

A replacement plug would be a better solution,and if you could find a car from the same year and of the same spec I suspect the wire configuration and colours would be the same,so you could just cut and join the wires.Obviously you have to then make sure that the joins are good,other wise you'll be back to square one though.
I'll see if I can replace it, I see what I can find on ebay or pistonheads.

Thanks again lagdti
Currently in kr1ss's garage:
1994 Renault Clio I 1.4RT
kr1ss is offline  
For the best viewing experience please update your browser to Google Chrome