Join Date: Jan 2006
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 1
Thanked 28 Times in 27 Posts
Hi and a very warm welcome to the forum.
Not too sure about the dash lights coming.
When you say bleed the car do you mean the heater system.
If so it is neccessary to undo the bleed screws located within the water pipes. On the Megane there is one near to the heater inlet pipe which will need to be undone first. Run the car at a fast idle until water that is free of air bubbles flows through. Next up there should be another bleed screw located near the thermostat. repeat the same proceedure for this one. On some models there is a bleed screw on the radiator. This should then be bled. Under no circumstanses let the header tank drop down to far though or you will have to start the whole proceedure all over again.
Hope this helps. Kind regrds Oily.
I am not an alcoholic. Alcoholics go to meetings:D "
Currently in Oilyrag's garage:
59 Vauxhall Zaffira 1.6 Life & 1957 Austin A35