Join Date: Oct 2006
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 0
Thanked 28 Times in 27 Posts
Hi Eeeps and greetings from Slovenia.
I had similar problem with GPS antenna. I just replaced it with an internal one and fixed it on windscreen.
I wonder how did you program Trimble GPS module and how did you solved the "connector problem"?
You said that you read configuration from old module and write it in new one. What if you could not read from old module?
Anyway, great post from you
I found the correct connector - Tyco Electronics MicroMatch type. Carefully removed the old header and fitted the new MicroMatch.
The configuration was not much different from the factory default from Trimble. I guess these defaults would work fine in practice (just the setting for acceptable receive power level (3 rather than 2) and PDOP mask (10 rather than 12)).
I did use a GPS antenna on the dash for a little while but I found the signal was not nearly as good as the external SharkFin.
Currently in Eeeps's garage:
2011 Clio III dCi 88 Dynamique and 2016 CitroŽn Grand C4 Picasso Exclusive+ EAT6 2.0 BlueHDi