Originally Posted by Laguna II Owner
A couple of things to note about the rear suspension..
Firstly, if the Laguna has the self levelling Xenon Headlights, it may be necessary to reinitialise them after this job has been completed..
Also I would never attempt to heat the rear axle with a blow torch !!
TIGHTENING TORQUES (in daN.m)
Wheel bolt 10.5
Pillar bolt 0.7
Caliper yoke bolt 10.5
Hub nut 28
Stub-axle carrier bolt 10.5
Brake union 1.4
Shock absorber lower bolt 10.5
Rear axle mounting bolt 8
IMPORTANT: The rear axle mounting bolts must
automatically be replaced and tightened to the
recommended torque to avoid slackening or
deterioration of the bolts.
Job best left to Renault or Renault Specialist IMHO.
thanks for your input