Join Date: Mar 2009
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 0
Thanked 44 Times in 41 Posts
polarity issue on VDA connector too
taking note of the bit about 'reverse polarity' - you need to follow the part of the instructions that correct this, as the Renault ISO's do have permanent and ignition live crossed over.
Um***8230; So "permanent" and "ignition live" are both +12V, and not Ground (-)?
In that case, have they been swapped around in the VDA connector as well? If so, I've got some adapter harness rewiring to do.
The reason I'm asking: My Sony Ericsson HCB-700 works fine when the engine is running, but switches itself off when I turn off the engine,
and I can't switch it on by hand either. I have to turn on the engine to turn on the unit itself.
Currently in costeau's garage:
2008 Ford Mondeo 2.0 TDCi (Used to have a 2004 Laguna 1.8)
Last edited by costeau; 28th June 2009 at 10:58 AM.
Reason: Purely layout - No content changed.