Renault Forums :: Independent Renault forum - View Single Post - 02-2.0 Litre IDE Re-initialisation

View Single Post
post #4 of (permalink) Old 9th September 2009 Thread Starter
Junior Member
Join Date: Jun 2009
Posts: 2
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 0
Thanked 0 Times in 0 Posts
Hi BBalazs
I have managed to get the Re-Initialisation process of a another tech it seems to apply i any new parts are fitted to ether Cam timing of Fueling any way here it goes

Switch Ingnition.
Disconnect the battery (wait for 3 mins for the capacitors to discharge).
Reconnect battery.
Switch on Ignition.
Erase any fault codes.
Reset engine addaptives. (Wait 15 seconds before starting so that the ECU can initialize).
Start engine and allow the engine to idle for 15 minutes, (Ensure no consumers are activated and no action is applied to the throttle pedal)(to set idle regulation).
Raise engine speed for 30 to 40 seconds at a stable engine R.P.M between 2500 and 3000, with out consumers activated (to set the richness parameters)
Upon completion decelrate to enable the RPM to return to idle immediately afterwards.

I hope this help some one out there in RENAULT Land

Regards to all Chris
Currently in 5watt's garage:
Renault MK
5watt is offline  
For the best viewing experience please update your browser to Google Chrome