Join Date: Jul 2005
Nominated 0 Times in 7 Posts
TOTW/F/M Award(s): 8
Thanked 95 Times in 64 Posts
If it's a Phase 1 (pre-2005) then the card reader slot should simply unclip from the dash. Just push a flat blade screwdriver between the left or right hand edge of the reader and the dash, and carefully lever it out (take care not to mark anything.) It should be easy enough to figure it out after that, though if the card reader is damaged, you may have to replace it. The good news is that the readers aren't coded, so you can get one from a scrappy's.
On the Phase 2, the card reader is integrated into the climate control panel. That's going to be a bit trickier.
I'm guessing it's a phase 1, because I think they dropped the 1.8 for the phase 2.
Currently in Horatio's garage:
2010 Laguna III Initiale.