Renault Forums :: Independent Renault forum - View Single Post - Sourcing Compatible Model/Years for a Delphi ECU Loom Connector

View Single Post
post #3 of (permalink) Old 16th November 2009 Thread Starter
Junior Member
InBadNeedOfHelp's Avatar
Join Date: Nov 2009
Posts: 3
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 0
Thanked 0 Times in 0 Posts
Thanks 'tolsen' ... your suggest is excellent ... however.

The connector on the end of the loom which plugs into the ECU is a self sealed Delphi which needs a push terminal tool to re-connect the pins back into the connector.

Keeping this in mind, I figured perhaps it would be easier to replace the connector as a whole by cutting the loom short of the connector and then joining back in with the replacement and this way I can be sure the problem has been replaced on all cores and there-by avoid having to figure out which cores have <OR> will go faulty.

Any idea's as to how to find the compatible models/years ... I tried calling 'Customer Services', but they put me onto the local dealer who said he could not be sure but he thought the ECU could change in a model every couple of months ....

Possible Additions to the list:
Kangoo Rapid 1.5 dCi - (Awaiting Confirmation)
Grand Scenic 1.5 dCi - (Awaiting Confirmation)
Scenic 1.5 dCi - (Awaiting Confirmation)

Last edited by InBadNeedOfHelp; 16th November 2009 at 01:16 PM.
InBadNeedOfHelp is offline  
For the best viewing experience please update your browser to Google Chrome