Join Date: Jan 2010
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 2
Thanked 3 Times in 1 Post
Scenic II - Remove front bumper, install fog lights *pics*
Hello! First of all, sorry for my English
Removing the bumper: The process was much simpler than seemed at first glance. Unscrew at 30 degrees plastic rivets (6 pcs.) on front grill, so that the cap would be raised a bit, then gently pulling rivets.
Unscrew the bolt in the middle (marked box on the first photo
The 7mm socket, unscrew 2 bolts under the wheel arches on both sides.
The 10mm socket, unscrew 3 bolts holding the lower bumper and the protective cover the engine compartment.
Easy movements hands catch the bumper at the joint with the front wing on both sides.
Under the head-light unit on the left and right sides, neatly that it had not damage the paint, catch a screwdriver "tongue" holding the bumper.
A maximum of 10 minutes, and the bumper removed.
In the same time I decided to replace the horn, because of the pathetic "beep" you get from him
From inside the bumper, take off the plastic caps, 2 bolts on each.
Set the fog, new bolts from the installation kit I never used, skrewed back the old ones.
Connecting plugs and fix the wiring in the designated place for it.
At the end of performing the removal procedure bumper in the reverse direction. Job done!
Currently in StringStudio's garage:
2006 Renault Scenic II, Phase 2 / 1.5dCi / 106HP