Join Date: Jul 2010
Nominated 1 Time in 1 Post
TOTW/F/M Award(s): 0
Thanked 0 Times in 0 Posts
Re: Renault Scenic II - Access the resistor pack in 5 mins.
My fan 1 & 3 failed, accessed the resistors as per thread - the easiest so far on the Scenic!
My plug was burnt on the negaitve lead - overheating due to poor connection, I can only assuem it's moisture on -ve lead causing Black Wire corrosion. I had to strip back a good 30cm before I could get to a decent bit of copper. I cut out the plug totally and soldered all joints. Gave the Black & Red feed to the fan a good tug and released excess cable to enable soldering out of the dash hole.
Now working all speeds took about 30 minutes in all.
Thanks for the quick access tip otherwise I would have had the whole dash off! - Excellent forum.