Renault Forums :: Independent Renault forum - View Single Post - Renault Clio - Tuning and Modding - Fitting a sub power supply

View Single Post
post #5 of (permalink) Old 22nd January 2011
Diamond member
skunksmash's Avatar
Join Date: Aug 2010
Posts: 138
Nominated 0 Times in 0 Posts
TOTW/F/M Award(s): 0
Thanks: 36
Thanked 9 Times in 9 Posts
Exclamation Re: Renault Clio - Tuning and Modding - Fitting a sub power supply

Originally Posted by mycliort View Post
ive wired in a sub and after market speakers to my head unit. But its and after market head unit too. you need to have:
RCA (phono) outs on the back of the head unit - with an RCA cable from the unit to your amp

The Remote cable is usually blue and should just fasten into the exsisting rem cable socket. if not. some improvising is needed, take off some casing and twist together, cover in electrical tape.

The power cable which goes from the battery to the amp is the tricky one. It needs and in line fuse and it needs to be closer to the battery as possible. Not the easiest to get through to be honest. where to put it through. there is a gromit at the top of the firewall underthe bonnet, far right under the windscreen resevoir. it may take some time and might be hard to see, but its there. Ive had two MK2 clios and ive wired them both.

any probs let me know

what about a Laguna...??

im about to try & attempt a 0ga run to the boot (for about 1500wrms), but for the life of me i cannot find a suitable place to get through the firewall & come out in the passenger side......

Currently in skunksmash's garage:
2003 Laguna 1.9DCI Dynamique
skunksmash is offline  
For the best viewing experience please update your browser to Google Chrome