Renault Forums :: Independent Renault forum - View Single Post - Renault Clio 2 - ABS Problems*FIXED*

View Single Post
post #4 of (permalink) Old 12th March 2012
Junior Member
Join Date: Mar 2010
Posts: 22
Nominated 0 Times in 1 Post
TOTW/F/M Award(s): 0
Thanks: 1
Thanked 0 Times in 0 Posts
Re: Renault Clio 2 - ABS Problems*FIXED*

had the same problem with my clio 1.2 2001.
Both rings were split and corroded and the abs sensors showed issues with all four units and was unable to get the front ones reset.
Went the other option of replacing the rings on the driveshaft ends which is a very straightforward job (if a bit problematic creating enough room to get the driveshaft ends free of the hubs) but sweat fitting both rings was easy enough. (Rings were 12 pair from ebay !) This didn't clear the issue with the ABs though.
Eventually tracked fault to the abs poump and after changing out with a tested 2nd unit all was well.
Currently in mg-tart's garage:
Clio 1.2, Espace 2007, MGTF, MG Midget (x4), MGB GT (x4)
mg-tart is offline  
For the best viewing experience please update your browser to Google Chrome