Join Date: Apr 2009
Nominated 0 Times in 2 Posts
TOTW/F/M Award(s): 2
Thanked 1 Time in 1 Post
Re: Scenic wiper arm bearing pin
Hi, I simply held mine secure and lightlt tapped out with the bearing still atached. Then the bearing will probably fall apart on you or else you would not be changing it. Then I took a dremmel and carefully cut off the inner race of the bearing.
Next you need to file the castle end to make ith esame o/d as he rest of the spline. Then fit the bearing in the hole and use a vic to squeeze the spline through the bearing.
be careful through all the opeartions as the wiper arm can snap.
Its easy enough, a little time consuming but you will save £100 which you can put towards the next fault on you Renault (I know I did).
Currently in David Lowman's garage:
Grand Scenic 2004 1.9DCi & Megane 1.5Dci 2003